Packaging Accessories

Tape-Sealed Pressure Bags

This hydrostatically-tested bag that meets 95 kPa pressure requirements as outlined in the 49 CFR, IATA and ICAO regulations. These bags are easy-to-use and do not require a heat sealer, but rather tapes closed. Simply add your non-pressure tested inner, peel the backing off the adhesive edge, and press firmly. They are available two convenient sizes.

BI-BIOBAG1B	6" x 8.5" (15.24 cm x 21.59 cm)
BI-BIOBAG2B	11" x 12" (27.94 cm x 30.48 cm)

Heat-Sealed Pressure Bags

These bags were developed to make non-tested inners comply with pressure test requirements for shipping liquids by air. Electric heat sealers are mandatory to use with pressure bags to comply with 95 kPa requirements.

Thickness: 4 mil
Case Quantities:
250 (BSS13)
500 (BSS4 and BSS7)
1000 (BSS3 and BSS5)
2000 (BSS1)
Product Codes:

BI-BSS1	2.25" x 9" (5.72 cm x 22.86 cm)
BI-BSS3	4" x 9" (10.16 cm x 22.86 cm)
BI-BSS4	14" x 26" (35.56 cm x 66.04 cm)
BI-BSS5	9" x 14" (22.86 cm x 35.56 cm)
BI-BSS7	20" x 30" (50.8 cm x 76.2 cm)
BI-BSS13	30" x 30" (76.2 cm x 76.2 cm)

Leakproof Zipper Bags

BI-4754PE	7" x 8" (17.78 cm x 20.32 cm)
BI-4755PE	9" x 12" (22.86 cm x 30.48)

Leakproof/Siftproof Liner Bags

BI-BSS8	0.31 mil, 24" x 24" (60.96 cm x 60.96 cm)
BI-BSS9	0.51 mil, 30" x 37" (76.2 cm x 93.98 cm)
BI-BSS10	0.55 mil, 43" x 48" (109.22 cm x 121.92 cm)
BI-BSS11	4 mil, 7" x 24" (17.78 cm x 60.96 cm)
BI-BSS12	4 mil, 10" x 30" (25.4 cm x 76.2 cm)

Pink Anti Static Bags

All anti static bags mentioned contain anti static properties, please contact us for more information to ensure compatibility before ordering.

BI-BSS15	10" x 14" (25.4 cm x 35.56 cm)
BI-BSS16	2 mil, 9" x 12" (22.86 cm x 30.48 cm)
BI-BSS17	12" x 18" (30.48 cm x 45.72 cm)
BI-BSS18	18" x 24" (45.72 cm x 60.96 cm)

Heat Sealers

BI-HS2	12" Impulse Heat Sealer
BI-HS3	16" Impulse Heat Sealerl
BI-SILICO12	Silicon for 12" Heat Sealer
BI-SILICO16	Silicon for 16" Heat Sealer
BI-TEFLON12	Teflon strips for 12" Heat Sealer
BI-TEFLON16	Teflon strips for 16" Heat Sealer
BI-WIRES12	Wires for 12" Heat Sealer
BI-WIRES16	Wires for 16" Heat Sealer

3M #305 Clear Tape, 48 mm x 100 m

PA-MSST1

3M #375 Clear Tape, 48 mm x 100 m

PA-MSST4

3M Tartan Filament Tape 8934, 48 mm x 55 m

PA-MSST5

Kraft Packing Tape

PA-GPS1	260, 3" x 450' (7.62 cm x 137.16 m)
PA-GPS2	285, 3" x 450' (7.62 cm x 137.16 m)

Tape Dispenser

PA-MSSTD1

Blank Envelopes

AC-MSPS510

Packing List Enclosed Envelopes

AC-MSGB105	English
AC-MSGB105B	Bilingual (English/French)

Packing List Enclosed Envelopes

AC-MSGB810

Self-Sealing Bubble Wrap Pouch

AB-SSBP01

White Packing Peanuts

AB-PEABD01

Paint Can Clips

MT-PCCLIPS

Torque Wrenches and Fittings

Precise control of torque is the key to any good assembly. It helps ensure that the product performs as expected and meets the regulatory requirements. Hundreds of thousands of dollars are paid out in fines each year by companies that fail to close their packagings with the proper torque. Stay in compliance and avoid fines. Easy to read gauge shows readings in pounds and Newton-meters.

PA-MTTWH63	63 mm
PA-MTTWH70	70 mm

PA-MTTW20	20 ft-lbs., fits 2" and 0.75" plugs
PA-MTVTW1	0-250 in-lbs.
PA-MTVTW2	0.5" drive
PA-MTVTWA	Adapter, 8" and 0.5" drives