Two-Color Thermal Transfer Printers
Home / Printers & Ribbons / Two Color Thermal Transfer Printers
Two Colors Are Better Than One
ICC is proud to offer two-color thermal transfer label and barcode printers to help chemical manufacturers comply with GHS labeling regulations.
Whether you are printing small container labels or drum labels
containing the shipping symbols, we have a printer to meet your needs. These printers are extremely reliable and offer the flexibility of using a variety of cost effective pressure sensitive paper or synthetic materials that meet IMDG requirements for shipping dangerous goods by sea.
Two Color Label Printer Models
- The cab XC4 prints labels up to 4.57" wide and 79" long.
The model is used to print a wide variety of smaller GHS chemical labels and tags.
- The cab XC6 prints labels up to 7.09" wide and 59" long.
The model is ideal for to producing GHS drum labels that incorporate the shipping symbols.
Low Cost per Label with Ribbon Saver
The cab series of printers come standard with built in ribbon saver that automatically stops the one of the ribbons from moving when nothing is being printed This is particularly important when printing the red GHS pictograms on part of a larger label.
- Label printer (Either XC4 or XC6)
- Power supply
- Operation manual
- Windows driver
- cablabel R2+
- Service manual on CD-ROM
1. Large graphic display
White backlight guarantees optimal legibility.
5. Solid, buckling resistant metal chassis
It is made of die-cast aluminum. All devices are assembled to it.
2. Ribbon retainer
The three-part tightening axles allow a fast and easy ribbon exchange.
6. Roll holder
The swing lever and the integrated brake make sure that the labels are unwound with constant tension.
3. Easy adjustment
The printheads are pressed down with plungers. One is mounted stationary at the inner surface, the other one is pushed to the right label margin.
7. Ribbon saver for printhead 1
This process avoids smudging printing when pulling back labels after the printing process. Ribbon is saved when large labels with a small printed area are required.
4. Peripheral connection
All additional modules such as stacker and cutter are easily adjustable. All peripheral devices can be attached to the printer with two adapters and affixed with one screw in a matter of seconds.
|Printhead||Printing method||Thermal transfer|
|Print resolution dpi||300||300|
|Print spedd up to mm / s||30, 40, 50, 75, 100, 125||30, 40, 50, 75, 100, 125|
|Print width up to mm||105.6||162.6|
|Material||Labels, continuous rolls or fan-folded||Paper, cardboard, textiles, plastics such as PET, PE, PP, PVC, PU, acrylate, PI|
|Thickness mm / weight g / m2||0.05 – 0.8 / 60 – 180|
|Height: Labels mm of liner or continuous material mm||20mm – 116mm||50mm – 176mm|
|25mm – 120mm||50mm – 180mm|
|Label height* mm||20mm – 2000mm||20mm – 1500mm|
|Media roll: Total diameter up to mm Core diameter mm Winding direction||300mm|
|Outside or inside|
|Ribbon||Ink||Outside or inside|
|Roll diameter up to mm||72|
|Core diameter mm||25.4|
|Ribbon length variable up to m||360|
|Width** up to mm||25 – 114||55 – 165|
|Saver printhead 1||[Included Standard]|
|Dimensions||Height x Depth x Width mm||395 x 554 x 248||395 x 554 x 358|
|Label sensor||Gap sensor||For leading edge of the label or punching marks and end of material|
|Reflective sensor from the botton||For printing marks|
|Distance to leading edge mm||5mm – 53mm|
|Electronics||Processor high speed 32 Bit ColdFire/clock rate MHz||266MHz|
|Memory IFFS MB Flash||8MB|
|Slot for CompactFlash Type I memory card||[Included Standard]|
|Slot for wireless LAN card||[Included Standard]|
|Battery buffer for||Real-time clock, printout of time and date Data storage on shut-down|
|Warning signal||Acoustic signal in case of error|
|Interfaces||USB 2.0 high speed slave for PC connection||[Included Standard]|
|Ethernet 10 / 100 Base T, LPD, RawIP printing, ftp printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP||[Included Standard]|
|Peripheral connection||[Included Standard]|
|WLAN card 802.11b / g WEP / WPA PSK (TKIP)||[Optional Standard]|
|2x USB master for||For external operation panel, keyboard, scanner, service key, USB flash drive|
|Operating data||Power supply||100 – 240 V ~ 50 / 60 Hz, PFC|
|Power consumption||Max. 300 W|
|Temperature / Humidity: Operation Storage Transport||+5 – 40°C / 10 – 85% not condensing|
|+0 – 60°C / 20 – 85% not condensing|
|-25 – 60°C / 20 – 85% not condensing|
|Approvals||CE, in preparation FCC class A, CB, CCC, UL|
* Limitations may apply to small labels, thin materials or strong adhesives. Critical materials or applications must be tested and approved.
** The ribbon should be roughly the same width as the label in order to avoid folding.