Skip to main content

Are You Prepared for Transport Canada’s Site Registration Requirement?

Are You Prepared for Transport Canada’s Site Registration Requirement?

Last year, Transport Canada introduced a new requirement into the “Transportation of Dangerous Goods Regulations,” (TDGR) adding a whole new section, Part 17, Site Registration Requirements. This is actually the rebirth of a very old requirement, one that requires companies that handle, offer for transport, transport, or import non-exempt dangerous goods into Canada to register some basic details with the agency. The goal is to allow Transport Canada to have a listing of the stakeholders in Canada who take part in regulated activities. Note that while site registration is not part of the system created by the United Nations in their Recommendations on the Transport of Dangerous Goods, it does bear a resemblance to the requirements in the United States “Hazardous Materials Regulations,” sections 107.601 to 620, where shippers and carriers of certain types of shipments must register.

You’re not required to register until the one-year anniversary of the publication of the new rule, which is October 25th of 2024. However, you will have to do some information-gathering first, so you may want to get started now and beat the last-minute rush. Here are the steps you need to take to get your site registered.

Step 1 – Do You Need to Register?

Transport Canada has provided a “questionnaire” to help you decide if you need to register. It’s comically short, consisting of only one question:

  • Do you or your organization take part in DG activities at sites that you own or operate in Canada (import, offer for transport, handle, or transport dangerous goods)? Yes/No

However, there’s a little more to it than that. You don’t have to register if the only dangerous goods you ship are exempted under Special Cases in Part 1 or certain special provisions in Schedule 2. In these cases, you aren’t considered to be dealing with “regulated” goods and don’t have to register. Note, however, that if you are using the “500 kg exemption” found in TDGR section 1.16, you do have to register.

You also don’t have to register if all the dangerous goods at any of your sites are under one of the following exemptions:

  • Your dangerous goods activities only involve goods originating from outside Canada and passing through Canada to a destination outside Canada without any handling being done in Canada;
  • You have dangerous goods that cross the U.S./Canada border, but you don’t have headquarters or own or operate a site in Canada; or
  • The site in question is an oil well.

Step 2 – Gathering Information

You’ll need to know some information about your company and the site (or sites) you plan to register. First, decide who will be the primary contact to represent your company. Transport Canada says this can be “the organization’s owner, or … someone with permission to act on their behalf.” Is it you? Congratulations. You’ll also need an alternate contact to serve as a backup, so get their contact information ready as well. For each contact you must provide the full name, e-mail address and telephone number.

Next, you’ll need to find out the Canada Revenue Agency (CRA) business number for your organization. Your accounting or financial department will probably have this information. You may need a GCKey which, again, your accounting department should be able to provide. The GCKey service is provided by the Government of Canada to allow you to securely conduct online business with various governmental programs and services. It’s a unique username and password (electronic credential) that allows you to communicate securely with online government services such as the Client Identification Database (CID) that you’ll be registering with. You can find out more in the “About GCKey” site at https://clegc-gckey.gc.ca/j/eng/AB-01.

Other information you must obtain includes:

  • Your business’s legal and operating name (remember, sometimes your incorporated name is different than your “brand” name);
  • Your head corporate address;
  • The applicable North American Industry Classification System (NAICS) Code(s) for your company. If you don’t know what codes apply to your organization, you can find out how to assign them at Statistics Canada.

Then, get the address or addresses for each site where your organization does dangerous goods activities. If you have a location without a street address, such as a mine or bush camp, you can give either the “Legal Land Description” or the longitude and latitude of the location. If possible, when registering more than one site, give each one a name, such as “Larimer Camp” or “Production Facility,” but this is optional. It’s also recommended but not mandatory to provide a telephone number and fax number (if one exists) for each site.

Finally, consult with your shipping and product managers to figure out what types of dangerous goods are handled, offered for transport, transported, or imported at each site your organization owns. Get a list of the classes and/or divisions your company deals with. You won’t be able just to, for example, register “Class 4.” Instead, you’ll have to specify which division or divisions in Class 4 are relevant to your organization, such as “Division 4.2.” If you are registering Class 1 Explosives, you’ll need to indicate each Compatibility Group letter as well as each division.

You’ll also have to be able to tell transport which activities (handling, offering for transport, transporting, or importing) take place at the site, and which modes of transport (road, rail, air or marine) are used.

Step 3 – Registering

Once you’ve got all that information, you just need to head to the Registration Portal at https://cid-bdic.tc.canada.ca/en/SignIn. Sign in with your GCKey, and just add the above information where requested. If you have any problems or questions, take a look at https://tc.canada.ca/en/dangerous-goods/client-identification-database-cid/cid-user-guides/client-identification-database-cid-platform-user-guide for Transport Canada’s complete user guide, which steps you through the whole process and shows a screen-by-screen approach to completing the registration.

After you’ve completed your initial registration, the portal will take you to the CID “Dashboard.” This will allow you to review your information and make any changes or updates as necessary. Remember that you must review and update your registration annually, so make a note of when that date will arrive.

Conclusions

The Client Identification Database is a new take on a very old requirement that had been eliminated from the TDGR many years ago but has a whole new look. Unlike what industry originally feared, the process is relatively streamlined and doesn’t require a lot of information. A typical site shouldn’t take more than an hour to register once you’ve collected the data you need. And with this information, Transport Canada should be able to design and enforce their regulations more efficiently.

Contact Us

Do you have any questions about upcoming regulatory change in Canada or the United States? Our team of experts is just a call away for our customers at 855.734.5469 or send us an email, we’re happy to help. We can advise you how to comply with current and upcoming regulations.

Stay up to date and sign up for our newsletter!

We have all the products, services, and training you need to ensure your staff is properly trained and informed.

Glass Shipping Kits Canadian TDG Publications Worded Placards

References:

Canada Gazette, Part II, Volume 157, Number 22, “Regulations Amending the Transportation of Dangerous Goods Regulations (Site Registration Requirements): SOR/2023-206”

Transport Canada, Client Identification Database (CID) User’s Guide

Barbara Foster

Barbara Foster graduated from Dalhousie University with a Master’s degree in Chemistry and a Bachelor’s degree in Education. As one of ICC Compliance Center’s most senior employees, she has worked in the Toronto office for the past three decades as a Regulatory Affairs Specialist and Trainer. She is fluent in various US, Canadian, and international regulations involving transportation, including TDG, 49 CFR, ICAO, IMDG, and the ADR/RID. She also specializes in the hazard communication standards of OSHA, WHMIS, CCCR, and the Globally Harmonized System for Classification and Labelling (GHS). Barbara is the author of ICC’s TDG Clear Language Driver and Handler’s Guide. Currently, she is a participant on the Canadian General Standards Board committee where she creates training standards for transportation of dangerous goods in Canada and is a past Chair of the Dangerous Goods Advisory Council.